BBGRB - WELD-ON 773 ABS SOLVENT CEMENT
- MSDS: BBGRB
- Manufacturer: INDUSTRIAL POLYCHEMICAL SERVICE
- Product Name: WELD-ON 773 ABS SOLVENT CEMENT
- National Stock Number: 8040-00F000455
Product Identification
Product ID:WELD-ON 773 ABS SOLVENT CEMENT
MSDS Date:01/01/1985
FSC:8040
NIIN:00F000455
MSDS Number: BBGRB
Responsible Party
Emergency Phone: 213/ 321-6515
Cage: 17510
Contractor
Telephone: 310-898-3300
Cage: 17510
Ingredients
ABS (ACRYLONITRILE BUTADIENE STYRENE) PLASTIC RESIN(BLACK)
CAS: 9003-56-9
RTECS: AT6970000
Fraction By Weight: 20%
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 80 - 85%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:SEVERE OVER EXPOSURE MAY RESULT IN NAUSEA,
DIZZINESS, HEADACHE; NARCOSIS, IRRITATION OF EYES.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR AND IF BREATHING STOPPED,
GIVE ARTIFICIAL RESPIRATION. LIQUID: REMOVE CONTAMINATED CLOTHING,
WASH SKIN W/ WATER FOR 15 MIN. FLUSH EYES WITH PLENTY OF WATER FOR
15 MIN, CALL PHYSICIAN. INGESTION: INDUCE VOMITING.
Fire Fighting
Flash Point:28F, T.O.C.
Lower Limits:1.8
Upper Limits:10
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM-ANSUL"PURPLE
K"AER O FOAM
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CONSIDERED FIRE HAZARD BECAUSE OF LOW
FLASH POINT.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. AVOID
BREATHING OF VAPORS. KEEP LIQUID OUT OF EYES. USH WITH LARGE VOLUME
OF WATER. CONTAIN LIQUID WITH SAND OR EARTH. PREVE LIQUID FROM
ENTERING DRAINS.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAME. AVOID PROLONGED BREATHING OF VAPOR. USE WITH ADEQUE
VENTILATION. AVOID CONTACT WITH SKIN.
Other Precautions:STORE BETWEEN 40F AND 110F. FOLLOW PRECAUTIONARY
INFORMATION GIVEN ON CONTAINER LABEL. ALL HANDLING EQUIPMENT SHOULD
BE ELECICALLY GROUNDED.
Exposure Controls
Respiratory Protection:RESPIRATOR FOR ORGANIC VAPORS FOR CONFINED AREAS
Ventilation:LOCAL EXHAUST PREFERABLE TO KEEP VAPOR CONC. BELOW TLV
Protective Gloves:RUBBER
Eye Protection:CHEMICAL SAFETY GOGGLES
Other Protective Equipment:IMPERVIOUS APRON IF NEEDED.
Supplemental Safety and Health
17109 S. MAIN STREET, P.O. BOX 471, GARDENA, CALIFORNIA 90247.
Chemical Properties
Boiling Pt:B.P. Text:175.2 MEK
Vapor Pres:71.
Vapor Density:2.5
Spec Gravity:0.86
Evaporation Rate & Reference:5.7, BUAC=1
Solubility in Water: 27 %
Appearance and Odor:BLACK OPAQUE, MEDIUM SYRUPY LIQUID-KETONE ODOR.
Percent Volatiles by Volume: 90
Stability
Stability Indicator/Materials to Avoid:YES
CAUSTICS, AMMONIA, INORGANIC ACIDS, CHLORINATED COMPOUNDS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, OTHER SOURCES OF
IGNITION
Conditions to Avoid Polymerization:HEAT, SPARKS, OPEN FLAME, OTHER
SOURCES OF IGNITION
Disposal
Waste Disposal Methods:INCINERATE. EXCESSIVE QUANTITIES SHOULD NOT BE
PERMITTED TO ENTER DRAINS. CONSULT DISPOSAL EXPERT. FOLLOW LOCAL,
STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.